A pipe elbow is a pipe fitting installed between two lengths of pipes to allow a change of direction, usually 45°, 90° or 180°. While 60° pipe elbow and other unusual elbows can also be made to meet the special requirements.
Pipe elbows can be made from many materials, such as cast iron, stainless steel, alloy steel, carbon steel, high-performance steel, nonferrous metals and plastics, etc. The ends to connect pipes may be machined for butt welding, fusion, threaded, or socket welding.
According to their radius, most elbows can be divided into short radius elbows and long radius elbows. The long radius elbows have a center to end distance that is 1.5 times the NPS in inches (R=1.5D), while the short radius is equal to the NPS in inches (R=1.0D).
Specifications for Pipe Elbow | | Production range |
| Seamless elbow | Welding elbow |
| Outside diameter | 1/2"～32" | 6"～60" |
| Wall thickness | 4mm～200mm |
| Bending radius | R=1D～10D |
| Product angle | 0°～180° |
Stone pipe&fittings is a premier pipe elbow manufacturer and supplier in China. Based on different materials, our pipe elbows include carbon steel elbows, stainless steel elbows, and alloy steel elbows etc. These products have obtained ISO9000, ISO14001, GB/T28001, and Q/SY1002.1 certification, and are exported to many countries including the USA, Italy, Belgium, Chile, Bolivia, United Arab Emirates, Brazil, South Korea, and India. Stone pipe&fittings is located in Cangzhou, 180 km from Beijing and 90 km from the major port city of Tianjin. This location gives us access to convenient transportation by sea, land, and air.
Thank you for browsing our website! Please contact us for more information!
